FREE SHIPPING - Replace your hood's prop rod today with our Redline Tuning Hood QuickLIFT system. Progressive gas springs will lift and hold your hood without the need for a poorly placed prop-rod, simply start to lift your hood and let our QuickLIFT system take over. Your hood will lift and hold firmly at the raised position... This QuickLIFT System fits the following Ford Fox-Body & half of the SN95 Mustang model years: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998.

This system is designed to work with nearly EVERY stock and aftermarket hood out there. We have been selling this system for nearly 2 decades and are well-known for our hood QuickLIFT applications. This system uses a special rivet to attach the hood brackets - it will bind the bracket to any material from any aftermarket hood out there. As long as the hood has copied the stock hood's understructure or frame (common), our hood brackets then rivet into place and will not hurt your hood. With the mounting locations we use, our system uses very low force gas springs which put very little stress on both the hood and fender, yet lift and hold the hood open securely.

Redline Tuning 1979-1998 Ford Mustang Hood QuickLIFT ELITE includes
(2) Polished Stainless Steel progressive rate gas springs (PN: RT-QL-200-5A-SS)
(2) Black powder-coated (over zinc-plating) Fender brackets (PN: 32-00002-R)
(2) Black powder-coated (over zinc-plating) Hood brackets (PN: 32-00003)
(4) Black #2 Multi-grip Rivets, (4) TEK Screws and (2) Aluminum Rivets (PN: 55-00022)

Features

• No compromise system design - We design and engineer our QuickLIFT systems, mounting the gas springs where they need to be for proper function. We will not compromise the system design if it affects the final function in any way, this is why Redline Tuning leads the industry.
• Simple one-handed operation, simply start to lift the hood and it will raise to the stock height unassisted in a smooth and controlled motion.
• Progressive gas springs. Our springs are not off the shelf struts, they are designed by us and manufactured to our specifications for each vehicle application. Our exclusive end-of-force dampening slows the rate of extension over the final inches of travel eliminating stress to the hood.
• QuickLIFT systems work with any hood (steel, fiberglass, SMC, carbon fiber etc.) - we design our systems using the stock hood so the main market is covered, however, our systems are designed to work with ALL aftermarket hoods unless otherwise specified. There are some applications where a unique system is required for an aftermarket hood, read the product technical specifications section for specifics on each application.
• Quick and simple installation – We design every QuickLIFT system and we write all of our own documentation. FULL COLOR installation manuals will arrive that will walk anyone through this simple installation - our customer comes first. You do NOT need to be a mechanic or car nut like us - we are so confident in our products that we post every installation manual on our website for you to review prior to ordering

• QuickLIFT systems all weigh approximately 1lb.
• Prop rod can be removed once you have installed patent-pending attachment system.
• Includes progressive rate, slow release gas springs - final few inches of operation, gas springs slow down extending rate allowing for a fluid lifting process.
• Black gas springs & powder coated hardware in the QuickLIFT PLUS while ELITE series gets the 316L Stainless steel gas springs with the same black hardware.
• Click here: QuickLIFT System clarification
• Full color installation manual with every QuickLIFT system.
• CAD designed hardware unique to each QuickLIFT application.